Aydin, K. Investigation of optimal machining Monel 400 superalloy considering carbon emissions using FEM, regression and ANN methods. J. Clean Prod. 447, 141616. https://doi.org/10.1016/J.JCLEPRO.2024.141616 (2024).
Google Scholar
Liu, Y. et al. Cutting performance and surface integrity for rotary ultrasonic elliptical milling of Inconel 718 with the ball end milling cutter. J. Mater. Process. Technol. 319, 118094. https://doi.org/10.1016/J.JMATPROTEC.2023.118094 (2023).
Google Scholar
Xu, M. et al. Machinability study of cryogenic-ultrasonic vibration-assisted milling Inconel 718 alloy. Int. J. Adv. Manuf. Technol. 127, 4887–4901. https://doi.org/10.1007/S00170-023-11858-4/FIGURES/16 (2023).
Google Scholar
Deshpande, Y., Andhare, A. & Sahu, N. K. Estimation of surface roughness using cutting parameters, force, sound, and vibration in turning of Inconel 718. J. Braz. Soc. Mech. Sci. Eng. 39, 5087–5096. https://doi.org/10.1007/s40430-017-0819-4 (2017).
Google Scholar
Ezugwu, E. O. et al. Evaluation of performance of various coolant grades when turning Ti–6Al–4V alloy with uncoated carbide tools under high-pressure coolant supplies. J. Manuf. Sci. Eng. 141, 014503. https://doi.org/10.1115/1.4041778 (2019).
Google Scholar
Kıvak, Ç. V. T. & Erzincanlı, F. Influence of different cooling methods on tool life, wear mechanisms and surface roughness in the milling of Nickel-based Waspaloy with WC tools. Arab. J. Sci. Eng. 44, 7979–7995. https://doi.org/10.1007/S13369-019-03963-Y/TABLES/9 (2019).
Google Scholar
Şap, S. et al. Machinability of different Cu–Gr composites in milling: Performance parameters prediction via machine learning models. Expert Syst. Appl. 272, 126770. https://doi.org/10.1016/j.eswa.2025.126770 (2025).
Google Scholar
Roy, S., Kumar, R., Panda, A. & Das, R. K. A brief review on machining of Inconel 718. Mater. Today Proc. 5, 18664–18673. https://doi.org/10.1016/j.matpr.2018.06.212 (2018).
Google Scholar
Kar, B. C., Panda, A., Kumar, R., Sahoo, A. K. & Mishra, R. R. Research trends in high-speed milling of metal alloys: A short review. Mater. Today Proc. 26, 2657–2662. https://doi.org/10.1016/j.matpr.2020.02.559 (2020).
Google Scholar
Zhang, Y. & Xu, X. Machine learning cutting force, surface roughness, and tool life in high-speed turning processes. Manuf. Lett. 29, 84–89. https://doi.org/10.1016/j.mfglet.2021.07.005 (2021).
Google Scholar
Özkan, E. K. & Ulaş, H. B. Comparison of four machine learning methods for occupational accidents based on national data on metal sector in Turkey. Saf. Sci. 174, 106468. https://doi.org/10.1016/j.ssci.2024.106468 (2024).
Google Scholar
Turan, İ, Özlü, B., Ulaş, H. B. & Demir, H. Prediction and modelling with taguchi, ANN and ANFIS of optimum machining parameters in drilling of Al 6082–T6 alloy. J. Manuf. Mater. Process. 9, 92. https://doi.org/10.3390/jmmp9030092 (2025).
Google Scholar
Jaypuria, S. et al. Prediction of electron beam weld quality from weld bead surface using clustering and support vector regression. Expert Syst. Appl. 211, 118677. https://doi.org/10.1016/j.eswa.2022.118677 (2023).
Google Scholar
Bhatt, A., Attia, H., Vargas, R. & Thomson, V. Wear mechanisms of WC coated and uncoated tools in finish turning of Inconel 718. Tribol. Int. 43, 1113–1121. https://doi.org/10.1016/J.TRIBOINT.2009.12.053 (2010).
Google Scholar
Zhou, J., Bushlya, V., Avdovic, P. & Ståhl, J. E. Study of surface quality in high-speed turning of Inconel 718 with uncoated and coated CBN tools. Int. J. Adv. Manuf. Technol. 58, 141–151. https://doi.org/10.1007/S00170-011-3374-7/METRICS (2012).
Google Scholar
Aslantas, K. & Alatrushi, L. K. H. Experimental study on the effect of cutting tool geometry in micro-milling of Inconel 718. Arab. J. Sci. Eng. 46, 2327–2342. https://doi.org/10.1007/S13369-020-05034-Z/FIGURES/17 (2021).
Google Scholar
Zhang, H. J., Sun, C., Liua, M. & Gao, F. Analysis of the optimization of tool geometric parameters for milling of Inconel718. IOP Conf. Ser. Mater. Sci. Eng. 426, 012030. https://doi.org/10.1088/1757-899X/423/1/012030 (2018).
Google Scholar
Ma, J. W., Wang, F. J., Jia, Z. Y. & Gao, Y. Y. Machining parameter optimization in high-speed milling for Inconel 718 curved surface. Mater. Manuf. Process. 31, 1692e9. https://doi.org/10.1080/10426914.2015.1117623 (2016).
Google Scholar
Tu, L. et al. Tool wear characteristics analysis of cBN cutting tools in high-speed turning of Inconel 718. Ceram. Int. 49, 635–658. https://doi.org/10.1016/J.CERAMINT.2022.09.034 (2023).
Google Scholar
Parida, A. K. & Maity, K. Numerical and experimental analysis of specific cutting energy in hot turning of Inconel 718. Measurement 133, 361–369. https://doi.org/10.1016/J.MEASUREMENT.2018.10.033 (2019).
Google Scholar
Parida, A. K. & Maity, K. Comparison the machinability of Inconel 718, Inconel 625 and Monel 400 in hot turning operation. Eng. Sci. Technol. Int. J. 21, 364–370. https://doi.org/10.1016/J.JESTCH.2018.03.018 (2018).
Google Scholar
Darshan, C. et al. Influence of dry and solid lubricant-assisted MQL cooling conditions on the machinability of Inconel 718 alloy with textured tool. Int. J. Adv. Manuf. Technol. 105, 1835–1849. https://doi.org/10.1007/S00170-019-04221-Z/FIGURES/11 (2019).
Google Scholar
Saleem, M. Q. & Mehmood, A. Eco-friendly precision turning of superalloy Inconel 718 using MQL based vegetable oils: Tool wear and surface integrity evaluation. J. Manuf. Process. 73, 112–127. https://doi.org/10.1016/J.JMAPRO.2021.10.059 (2022).
Google Scholar
Şap, E. et al. Understanding the effects of machinability properties of Incoloy 800 superalloy under different machining conditions using artificial intelligence methods. Mater. Today Commun. 38, 108521. https://doi.org/10.1016/j.mtcomm.2024.108521 (2024).
Google Scholar
Khanna, N., Airao, J., Kshitij, G., Nirala, C. K. & Hegab, H. Sustainability analysis of new hybrid cooling/lubrication strategies during machining Ti6Al4V and Inconel 718 alloys. Sustain. Mater. Technol. 36, e00606. https://doi.org/10.1016/J.SUSMAT.2023.E00606 (2023).
Google Scholar
Salur, E., Kuntoğlu, M., Aslan, A. & Pimenov, D. Y. The effects of MQL and dry environments on tool wear, cutting temperature, and power consumption during end milling of AISI 1040 steel. Metals 11, 1674. https://doi.org/10.3390/MET11111674 (2021).
Google Scholar
Tiwari, P. K., Raj, S., Kumar, R., Panda, A. & Sahoo, A. K. Machinability improvement investigation in face milling of Ti–3Al–2.5 V alloys using TiAlN coated carbide insert under dual nozzle minimum quantity lubrication cooling environment. Proc. Inst. Mech. Eng. Part E J. Process. Mech. Eng. https://doi.org/10.1177/09544089221132449 (2022).
Google Scholar
Mallick, R., Kumar, R., Panda, A. & Sahoo, A. K. Current status of hard turning in manufacturing: Aspects of cooling strategy and sustainability. Lubricants 11, 108. https://doi.org/10.3390/lubricants11030108 (2023).
Google Scholar
Mallick, R. et al. Assessing hard-turning performance improvement using ionic liquid-infused cutting fluids: Tribological benefits, tool life assessment, and sustainable machining. Proc. Inst. Mech. Eng. Part C J. Mech. https://doi.org/10.1177/09544062251323036 (2025).
Google Scholar
Siddique, M. Z. et al. Parametric analysis of tool wear, surface roughness and energy consumption during turning of Inconel 718 under Dry, Wet and MQL conditions. Machines 11, 1008. https://doi.org/10.3390/MACHINES11111008 (2023).
Google Scholar
Öztürk, B., Uğur, L. & Yildiz, A. Investigation of effect on energy consumption of surface roughness in X-axis and spindle servo motors in slot milling operation. Measurement 139, 92–102. https://doi.org/10.1016/j.measurement.2019.02.009 (2019).
Google Scholar
Özlü, B. Evaluation of energy consumption, cutting force, surface roughness and vibration in machining Toolox 44 steel using taguchi-based gray relational analysis. Surf. Rev. Lett. 29, 2250103. https://doi.org/10.1142/S0218625X22501037 (2022).
Google Scholar
Usca, Ü. A. et al. Estimation, optimization and analysis-based investigation of the energy consumption in machinability of ceramic-based metal matrix composite materials. J. Mater. Res. Technol. 17, 2987–2998. https://doi.org/10.1016/j.jmrt.2022.02.055 (2022).
Google Scholar
Şap, E., Usca, Ü. A., Değirmenci, Ü., Şap, S. & Uzun, M. Evaluation of machinability and energy consumption of CK45 steel using synthetic-based nanofluid and minimum quantity lubrication cutting fluid. Metals 15, 36. https://doi.org/10.3390/met15010036 (2025).
Google Scholar
Zerooğlu, T., Değirmenci, Ü. & Şap, S. A study on the machinability and environmental effects of milling AISI 5140 steel in sustainable cutting environments. Machines 12, 436. https://doi.org/10.3390/machines12070436 (2024).
Google Scholar
Al-Tamimi, A. A. & Sanjay, C. Intelligent systems to optimize and predict machining performance of inconel 825 alloy. Metals 13, 375. https://doi.org/10.3390/MET13020375 (2023).
Google Scholar
Yıldız, A., Uğur, L. & Parlak, İE. Optimization of the cutting parameters affecting the turning of AISI 52100 bearing steel using the Box-Behnken experimental design method. Appl. Sci. 13, 3. https://doi.org/10.3390/app13010003 (2023).
Google Scholar
Şirin, Ş & Kıvak, K. Effects of hybrid nanofluids on machining performance in MQL-milling of Inconel X-750 superalloy. J. Manuf. Process. 70, 163–176. https://doi.org/10.1016/j.jmapro.2021.08.038 (2021).
Google Scholar
Ross, N. S. et al. Carbon emissions and overall sustainability assessment in eco-friendly machining of Monel-400 alloy. Sustain. Mater. Technol. 37, e00675. https://doi.org/10.1016/J.SUSMAT.2023.E00675 (2023).
Google Scholar
Dubey, V., Sharma, A. K. & Pimenov, D. Y. Prediction of surface roughness using machine learning approach in MQL turning of AISI 304 steel by varying nanoparticle size in the cutting fluid. Lubricants 10, 81. https://doi.org/10.3390/LUBRICANTS10050081 (2022).
Google Scholar
Nguyen, A. T., Nguyen, V. H., Le, T. T. & Nguyen, N. T. Multiobjective optimization of surface roughness and tool wear in high-speed milling of AA6061 by machine learning and NSGA-II. Adv. Mater. Sci. Eng. 5406570, 1–21. https://doi.org/10.1155/2022/5406570 (2022).
Google Scholar
Akgün, M., Özlü, B. & Kara, F. Effect of PVD-TiN and CVD-Al2O3 coatings on cutting force, surface roughness, cutting power, and temperature in hard turning of AISI H13 steel. J. Mater. Eng. Perform. 32, 1390–1401. https://doi.org/10.1007/S11665-022-07190-9/FIGURES/9 (2023).
Google Scholar
Mahboob Ali, M. A., Azmi, A. I., Mohd Khalil, A. N. & Leong, K. W. Experimental study on minimal nanolubrication with surfactant in the turning of titanium alloys. Int. J. Adv. Manuf. Technol. 92, 117–127. https://doi.org/10.1007/S00170-017-0133-4/METRICS (2017).
Google Scholar
Suneesh, E. & Sivapragash, M. Parameter optimisation to combine low energy consumption with high surface integrity in turning Mg/Al2O3 hybrid composites under dry and MQL conditions. J. Braz. Soc. Mech. Sci. Eng. 41, 1–23. https://doi.org/10.1007/S40430-019-1587-0/TABLES/20 (2019).
Google Scholar
Sharma, A. K., Tiwari, A. K. & Dixit, A. R. Effects of minimum quantity lubrication (MQL) in machining processes using conventional and nanofluid based cutting fluids: A comprehensive review. J. Clean. Prod. 127, 1–18. https://doi.org/10.1016/j.jclepro.2016.03.146 (2016).
Google Scholar
Ul Haq, M. A. et al. Evaluating the effects of nano-fluids based MQL milling of IN718 associated to sustainable productions. J. Clean. Prod. 310, 127463. https://doi.org/10.1016/j.jclepro.2021.127463 (2021).
Google Scholar
Race, A. et al. Environmentally sustainable cooling strategies in milling of SA516: Effects on surface integrity of dry, flood and MQL machining. J. Clean Prod. 288, 125580. https://doi.org/10.1016/J.JCLEPRO.2020.125580 (2021).
Google Scholar
Khan, A. M. et al. Development of process performance simulator (PPS) and parametric optimization for sustainable machining considering carbon emission, cost and energy aspects. Renew. Sustain. Energy Rev. 139, 110738. https://doi.org/10.1016/J.RSER.2021.110738 (2021).
Google Scholar
Li, C., Tang, Y., Cui, L. & Li, P. A quantitative approach to analyze carbon emissions of CNC-based machining systems. J. Intell. Manuf. 26, 911–922. https://doi.org/10.1007/S10845-013-0812-4/TABLES/9 (2015).
Google Scholar
Sivalingam, V. et al. Towards sustainability assessment, energy consumption, and carbon emissions in cryogenic drilling of Alloy 20: A new approach towards sustainable future and challenges. Int. J. Adv. Manuf. Technol. 131, 1151–1165. https://doi.org/10.1007/S00170-024-13144-3/FIGURES/15 (2024).
Google Scholar
Zhang, H., Deng, Z., Fu, Y., Lv, L. & Yan, C. A process parameters optimization method of multi-pass dry milling for high efficiency, low energy and low carbon emissions. J. Clean. Prod. 148, 174–184. https://doi.org/10.1016/j.jclepro.2017.01.077 (2017).
Google Scholar
Gupta, M. K. et al. Environment and economic burden of sustainable cooling/lubrication methods in machining of Inconel-800. J. Clean. Prod. 287, 125074. https://doi.org/10.1016/J.JCLEPRO.2020.125074 (2021).
Google Scholar
Talib, N. & Rahim, E. A. Performance of modified jatropha oil in combination with hexagonal boron nitride particles as a bio-based lubricant for green machining. Tribol. Int. 118, 89–104. https://doi.org/10.1016/j.triboint.2017.09.016 (2018).
Google Scholar
Perçin, M., Aslantas, K., Ucun, I., Kaynak, Y. & Cicek, A. Micro-drilling of Ti–6Al–4V alloy: The effects of cooling/lubricating. Int. J. Precis. Eng. 45, 450–462. https://doi.org/10.1016/j.precisioneng.2016.02.015 (2016).
Google Scholar
Zahoor, S., Abdul-Kader, W., Shehzad, A. & Habib, M. S. Milling of Inconel 718: An experimental and integrated modeling approach for surface roughness. Int. J. Adv. Manuf. Technol. 120, 1609–1624. https://doi.org/10.1007/s00170-021-08648-1 (2022).
Google Scholar
Özlü, B., Demir, H., Türkmen, M. & Gündüz, S. Investigation of machinability of cooled microalloy stell in oil after the hot forging with coated and uncoated CBN cutting tools. Sigma J. Eng. Nat. Sci. 36, 1165–1174 (2018).
Özlü, B. & Akgün, M. Evaluation of the machinability performance of PH 13–8 Mo maraging steel used in the aerospace industry. Proc. Inst. Mech. Eng. Part E J. Process. 238, 687–699. https://doi.org/10.1177/09544089231216035 (2024).
Google Scholar
Taha, Z. et al. Vortex tube air cooling: The effect on surface roughness and power consumption in dry turning. Int. J. Automot. Mech. Eng. 8, 1477–1586. https://doi.org/10.15282/ijame.8.2013.34.0122 (2022).
Google Scholar
Yıldırım, Ç. V., Kıvak, T., Sarıkaya, M. & Şirin, Ş. Evaluation of tool wear, surface roughness/topography and chip morphology when machining of Ni-based alloy 625 under MQL, cryogenic cooling and CryoMQL. J. Mater. Res. Technol. 9, 2079–2092. https://doi.org/10.1016/j.jmrt.2019.12.069 (2020).
Google Scholar
Şirin, Ş, Sarıkaya, M., Yıldırım, Ç. V. & Kıvak, T. Machinability performance of nickel alloy X-750 with SiAlON ceramic cutting tool under dry, MQL and hBN mixed nanofluid-MQL. Tribol. Int. 153(106673), 2021. https://doi.org/10.1016/j.triboint.2020.106673 (2021).
Google Scholar
Da Silva, L. R. et al. Analysis of surface integrity for minimum quantity lubricant-MQL in grinding. Int. J. Mach. Tools Manuf. 47, 412–418. https://doi.org/10.1016/j.ijmachtools.2006.03.015 (2007).
Google Scholar
Yalçın, B., Özgür, A. E. & Koru, M. The effects of various cooling strategies on surface roughness and tool wear during soft materials milling. Mater. Des. 30, 896–899. https://doi.org/10.1016/j.matdes.2008.05.037 (2009).
Google Scholar
Jafarian, F. et al. Finite element simulation of machining Inconel 718 alloy including microstructure changes. Int. J. Mech. Sci. 88, 110–121. https://doi.org/10.1016/j.ijmecsci.2014.08.007 (2014).
Google Scholar
Mahesh, K., Philip, J. T., Joshi, S. N. & Kuriachen, B. Machinability of Inconel 718: A critical review on the impact of cutting temperatures. Mater. Manuf. Process. 36, 753–791. https://doi.org/10.1080/10426914.2020.1843671 (2021).
Google Scholar
Kuzu, A. T., Berenji, K. R., Ekim, B. C. & Bakkal, M. The thermal modeling of deep-hole drilling process under MQL condition. J. Manuf. Process. 29, 194–203. https://doi.org/10.1016/j.jmapro.2017.07.020 (2017).
Google Scholar
Thakur, A., Gangopadhyay, S., Maity, K. P. & Sahoo, S. K. Evaluation on effectiveness of CVD and PVD coated tools during dry machining of incoloy 825. Tribol. Trans. 59, 1048–1058. https://doi.org/10.1080/10402004.2015.1131350 (2016).
Google Scholar
Khan, M. M. A., Mithu, M. A. H. & Dhar, N. R. Effects of minimum quantity lubrication on turning AISI 9310 alloy steel using vegetable oil-based cutting fluid. J. Mater. Process. Technol. 209, 5573–5583. https://doi.org/10.1016/j.jmatprotec.2009.05.014 (2009).
Google Scholar
Naves, V. T. G., Da Silva, M. B. & Da Silva, F. J. Evaluation of the effect of application of cutting fluid at high pressure on tool wear during turning operation of AISI 316 austenitic stainless steel. Wear 302, 1201–1208. https://doi.org/10.1016/j.wear.2013.03.016 (2013).
Google Scholar
Binali, R. Experimental and machine learning comparison for measurement the machinability of nickel based alloy in pursuit of sustainability. Measurement 236, 115142. https://doi.org/10.1016/j.measurement.2024.115142 (2024).
Google Scholar
Khaliq, W., Zhang, C., Jamil, M. & Khan, A. M. Tool wear, surface quality, and residual stresses analysis of micro-machined additive manufactured Ti-6Al-4V under dry and MQL conditions. Tribol. Int. 151, 106408. https://doi.org/10.1016/j.triboint.2020.106408 (2020).
Google Scholar
Salimi-Yasar, H., Heris, S. Z., Shanbedi, M., Amiri, A. & Kameli, A. Experimental investigation of thermal properties of cutting fluid using soluble oil-based TiO2 nanofluid. Powder Technol. 310, 213–220. https://doi.org/10.1016/j.powtec.2016.12.078 (2017).
Google Scholar
Kaynak, Y., Gharibi, A. & Ozkutuk, M. Experimental and numerical study of chip formation in orthogonal cutting of Ti-5553 alloy: The influence of cryogenic, MQL, and high-pressure coolant supply. Int. J. Adv. Manuf. Technol. Int. 94, 1411–1428. https://doi.org/10.1007/s00170-017-0904-y (2018).
Google Scholar
Sani, A. S. A., AbdRahim, E., Sharif, S. & Sasahara, H. The influence of modified vegetable oils on tool failure mode and wear mechanisms when turning AISI 1045. Tribol. Int. 129, 347–362. https://doi.org/10.1016/j.triboint.2018.08.038 (2019).
Google Scholar
Asiltürk, I. & Akkuş, H. Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi method. Measurement 44, 1697–1704. https://doi.org/10.1016/j.measurement.2011.07.003 (2011).
Google Scholar
Hessainia, Z., Belbah, A., Yallese, M. A., Mabrouki, T. & Rigal, J. F. On the prediction of surface roughness in the hard turning based on cutting parameters and tool vibrations. Measurement 46, 1671–1681. https://doi.org/10.1016/j.measurement.2012.12.016 (2013).
Google Scholar
SreeramaReddy, T. V., Sornakumar, T., VenkataramaReddy, M. & Venkatram, R. Machinability of C45 steel with deep cryogenic treated tungsten carbide cutting tool inserts. Int. J. Refract. Met. Hard Mater. 27, 181–185. https://doi.org/10.1016/j.ijrmhm.2008.04.007 (2009).
Google Scholar
Benga, G. C. & Abrao, A. M. Turning of hardened 100Cr6 bearing steel with ceramic and PCBN cutting tools. J. Mater. Process. Technol. 143, 237–241. https://doi.org/10.1016/S0924-0136(03)00346-7 (2003).
Google Scholar
Bouacha, K., Yallese, M. A., Mabrouki, T. & Rigal, J. F. Statistical analysis of surface roughness and cutting forces using response surface methodology in hard turning of AISI 52100 bearing steel with CBN tool. Int. J. Refract. Met. Hard Mater. 28, 349–361. https://doi.org/10.1016/j.ijrmhm.2009.11.011 (2010).
Google Scholar
Carou, D., Rubio, E. M., Lauro, C. H. & Davim, J. P. The effect of minimum quantity lubrication in the intermittent turning of magnesium based on vibration signals. Measurement 94, 338–343. https://doi.org/10.1016/j.measurement.2016.08.016 (2016).
Google Scholar
